Print Server
How to install Print Server in WINXP
1. From Windows desktop, click Start->Settings->Control Panel
2. In the Pick a category, double click the Printers and Other Hardware.
3. select Add a printer
4. click Next
5. In the Local or Network Printer dialog box, select Local printer attached to this computer,
, uncheck Automatically detect and install my Plug and Play printer check box, and click Next.
6. In the Select a Printer Port dialog box, select Use the following port.
Verify that LPT1 (default setting) is selected in the Use the following port dialog box, and click Next.
7. In the Install Printer Software dialog box, select a printer which you used.
For example: Canon Bubble-Jet BJC-5500
Click Next.
8. In the Name your Printer dialog box, type a name for your printer.
For example: Canon Bubble-Jet BJC-5500
Click Next.
9. In the Printer Sharing dialog box, select Do not share this printer, and click Next
10. In the Printer Test Page dialog box, select No check box, and click Next
11. Click the “Finish” button to exit.
12. Enter the properties of printer icon
13. On the Ports tab, click
14. In the Printer Ports dialog box, select Standard TCP/IP Port, and click New Port
15. click Next
16. On the Printer Name or IP Address, enter the IP address of Printer.
Note: It's P-335U's LAN IP address.
17. In
the
18. On the Port Settings tab, check LPR check box, and input the default queue
name of print server: “LP1”. Then click “OK”.
19. click Next
20. Click Finish.
21. Click Close to close the window.
22. Click Apply
23. Now, your print server has been successfully installed via LPR. Click OK.
